Food packaging machine manufacturers and suppliers
Search News Category News Tags Latest News Archive Time

Pillow pouch packaging machine

pillow-pouch-packaging-machine

As people's living standards continue to increase, people's demands for food are also increasing. The development of the food market has brought a broader development market for the food flow wrapping machine. Among them, the pillow pouch packaging machine occupies a large market share in the packaging machinery industry. Pillow pouch packaging machine plays a vital role in the food production chain of an enterprise. However, many customers ignore the maintenance of the packaging machine when they enjoy the convenience and benefits of the packaging machine for the production chain.

pillow pouch packaging machine occupies a large market

A well-maintained packaging machine is more efficient and has a longer service life. Next, let's take a look at the maintenance of the pillow pouch packaging machine. Pillow pouch packaging machine maintenance is divided into three steps: mechanical parts, electrical parts, and mechanical lubrication.

Pillow pouch packaging machine mechanical parts maintenance

1. Although the pillow packing machine has been tested and run in the factory, the user should also run at a high speed after 24 hours of running at the medium speed.

2. After the new machine is running for one month, the operator should adjust the drive chain and the drive belt, and adjust it every two months after the operation.

3. The horizontally sealed main driven gear should be filled with grease once every two months. The vertical seal cover is cleaned twice a week, and the longitudinal seal slide is lubricated.

4. The operator should periodically check the fastening parts for looseness and lubricate the gears, racks, sprockets, chains, and leads.

5. The operator should always clean and wipe the machine cover and work surface to keep the machine clean.

Pillow pouch packaging machine electrical parts maintenance

1. Always check the wire ends of the joints before starting the machine.

2. Tiny particles such as dust may also affect some functions of the packaging machine. When the probe of the photoelectric switch or the proximity switch is dusty, it may cause malfunction, so it should be checked and cleaned frequently.

3. The detailed parts are also the focus of mechanical cleaning. For example, the surface of the horizontally sealed electric slip ring is cleaned with soft gauze and alcohol to remove the toner on the surface. (Note: be sure to turn off the power when cleaning)

4. Some parts of the pillow packing machine cannot be changed at will. Non-professionals must not open the electrical part. The parameters or procedures of the inverter, microcomputer and other control components have been set. Any change will cause the system to malfunction and the machine will not work properly.

Pillow pouch packaging machine lubrication

1. Rolling bearings are the parts with serious wear in the machine, so each rolling bearing should be greased once with a grease gun for about two months;

2. The sleeve on the packaging film idler, the bushing at the front sprocket of the feed conveyor should be filled with 40# mechanical oil;

3. The bite operation of the gear is also very important, and each gear should be infused with 40# mechanical oil at the appropriate time;

4. The lubrication of the chain is the most common. Relatively simple, each sprocket chain should be infused with mechanical oil with a kinematic viscosity greater than 40#.

5. The clutch is the key to the start of the packaging machine, and the clutch part should be greased at the right time.

Machinery is made up of many small parts. Once some parts are broken, it may affect the operation of the whole machine. Therefore, the daily maintenance and maintenance of the pillow pouch packaging machine is very important.

Pillow pouch packaging machine lubrication

Leave a Reply

Your email address will not be published. Required fields are marked *