Food packaging machine manufacturers and suppliers
Search News Category News Tags Latest News Archive Time

Precautions for Maintenance of Mask Machine Production Line

1587373696-3_副本

The maintenance of mask machine production line is very important, the main parts of the maintenance in place, not only can reduce the opportunity of equipment maintenance, but also can improve production efficiency. In general, TEFUDE facemask machinery needs to be maintained in five major structures, including appearance, transmission system, electrical system, ultrasonic system and pneumatic system.

(1)Appearance:

Masks are used to wear on the face, some of them are even used when entering the operating room. Therefore, in order to produce the reassuring mask, it is necessary to clean the mask machine every day to ensure its cleanness and tidiness.

(2)Transmission system:

The transmission system includes motor, gear, reducer, sprocket, chain, conveyor belt and other components. We must check whether there is dust and other things on the surface of the motor that affect the heat dissipation, whether the gear and sprocket are oiled, whether there are attachments, whether there is any foreign matter in the chain tension and whether the connection between the transmission parts is loose, whether the lubricating oil of the reducer is sufficient. We usually need to change the lubricating oil in 1000-1500 hours.

(3)Electrical system:

Check whether the circuit connector of the mask equipment is loose; whether the main power line and branch signal line are worn, aged and loose; whether the inside of the electrical box is clean; whether the exhaust fan works normally, etc.

(4)Ultrasonic system:

Check whether the ultrasonic system is clean, especially the ultrasonic electric box and ultrasonic transducer; it is necessary to clean the welding head without water; check whether the connecting line is good; pay attention to observe whether the voltmeter and ammeter pointer on the ultrasonic electric box are normal.

(5)Pneumatic system:

Check whether there is water in the air filter, check whether there is air leakage in the air pipe, check whether there is air leakage in the air cylinder, and check whether the orientation and operation of the air magnetic detector are normal.

(6)In addition: themedical mask production equipment shall not contact corrosive liquid and objects, for example, sweating may easily lead to rust of equipment parts; if the equipment is not used for a long time, the transmission system and rusty parts of the equipment shall be coated with anti rust oil.

In a word, only by maintaining the mask machine can we extend the service life of the machine and work for us for a long time, so as to improve the production efficiency and reduce the maintenance cost of the machine.

TEFUDE 1+2 Fully Automatic Mask Machine Production Line is a fully automatic mask production machine. From the production of mask body to the welding of ear band, including feeding, folding and pressing, nose line welding to the finished product, it is fully automatic without manual operation. Factory Direct! Welcome to consult and order!

 

 

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *